|
Message |
|
|
 Ladder Lashing Knot |
 |
Ladder lashing allows for a quick and secure method for constructing a ladder or for constructing a decking with evenly space decking pieces. This form of lashing has several advantages over the traditional floor lashing. Less material is required because unlike floor lashing a space can be left between each piece of the decking. Also, each rung is securely lashed in place by several loops of rope in much the same way as a square lashing; with the traditional floor lashing only a single loop of the rope holds each end of the decking in place, therefore if one piece loosens, the entire deck loosens. The ladder lashing has two forms; left and right, each is a mirror image of the other.
|
|
|
   Mon Sep 29, 2008 12:12 pm |
 |
|
|
| |
|
START: The ladder lashing is started by using a clove hitch stopped with two half hitches to secure a rope to the top end of each rail.
STEP 1: Lay an overhand loop over each side rail so that the running end of each loop is to the outside.
STEP 2: Place a rung across the rails so that the standing part of each overhand loop is over the end of the rung and the running part of each overhand loop is under the rung.
STEP 3: Pull the running part side of each overhand loop behind and to the outside of each rail.
STEP 4: Then pull the loop over the end of the rung.
|
|
|
Mon Sep 29, 2008 12:13 pm |
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
|
