Go to Stittsville Scouts Homepage

Stittsville Scouts Photo Gallery

Welcome to the Stittsville Scouts Photo Gallery


Album List  FAQ  Register  Login

Last uploads  Last comments  Most viewed  Top rated  My Favorites  Search
 
Last additions - ScouterRob
tautlinehitch2.jpg
Tautline Hitch57 viewsUsed as a hitch, which may be drawn up away from what it is looped around to tighten a line.
Since it will only slide one way, the Taut-line hitch is often used on tent ropes. The taut-line hitch will hold firmly on a smooth pole such as a scout stave. Place rope end around pole, make a turn below it, then bring rope up across the standing part around the pole and tuck through.

RATKINSONJan 26, 2008
tautlinehitch.jpg
Tautline Hitch47 viewsUsed as a hitch, which may be drawn up away from what it is looped around to tighten a line.RATKINSONJan 26, 2008
tautlinehitch-rolling.jpg
Tautline Hitch51 viewsUsed as a hitch, which may be drawn up away from what it is looped around to tighten a line.
RATKINSONJan 26, 2008
timberhitch.jpg
Timber Hitch41 viewsUsed to attach a rope to a log for dragging.
RATKINSONJan 26, 2008
turksheadknot.jpg
Turks Head Knot116 viewsRATKINSONJan 26, 2008
zepplinbend.jpg
Zepplin Bend50 viewsRATKINSONJan 26, 2008
zigzagbraid.jpg
Zig Zag Braid55 viewsRATKINSONJan 26, 2008
reefknot.jpg
Reef Knot44 viewsRATKINSONJan 26, 2008
ringknot.jpg
Ring Knot45 viewsThis is one of the best bends a beginner could tie. It is very easy to remember, easy to tie and quite handsome. The ring knot is a bit hard to untie and is a bit bulky, but otherwise a very respectable knot. To tie: Follow the diagrams, which will create two overhand knots interlocked.RATKINSONJan 26, 2008
rollinghitch.jpg
Rolling Hitch98 viewsRATKINSONJan 26, 2008
sailorshitch.jpg
Sailor's Hitch33 viewsDraws up without working to form a strong, secure hitch that will not jam. It may be used as a way to tie a smaller rope to a very large rope. (The smaller rope should pull left when tied as shown here.) Push a bight through the final tuck to form a Slipped Sailor's Hitch.RATKINSONJan 26, 2008
sailorswhipping.jpg
Sailor's Whipping56 viewsRATKINSONJan 26, 2008
seizingbend.jpg
Seizing Bend44 viewsRATKINSONJan 26, 2008
sheepshank.jpg
Sheepshank37 viewsUsed to temporarily shorten a rope, or isolate a weak portion of rope.RATKINSONJan 26, 2008
sheetbend.jpg
Sheetbend30 viewsUsed to join two ropes together, which may be of unequal thickness. RATKINSONJan 26, 2008
slippedsheetbend.jpg
Slipped Sheet Bend25 viewsRATKINSONJan 26, 2008
snugglehitch.jpg
Snuggle Hitch35 viewsRATKINSONJan 26, 2008
hangmansknot2.jpg
Hangman's Knot37 viewsThis knot needs no definition. It is made with eight or nine turns and not thirteen as is often superstitiously suggested. Apart from its obvious function, it is a useful knot for the end of a lanyard.RATKINSONJan 26, 2008
huntersbend.jpg
Hunter's Bend27 viewsRATKINSONJan 26, 2008
knifelanyardknot.jpg
Knife Lanyard Knot502 viewsRATKINSONJan 26, 2008
ladderlashing1.jpg
Ladderlashing Knot35 viewsLadder lashing allows for a quick and secure method for constructing a ladder or for constructing a decking with evenly space decking pieces. This form of lashing has several advantages over the traditional floor lashing. Less material is required because unlike floor lashing a space can be left between each piece of the decking. Also, each rung is securely lashed in place by several loops of rope in much the same way as a square lashing; with the traditional floor lashing only a single loop of the rope holds each end of the decking in place, therefore if one piece loosens, the entire deck loosens. The ladder lashing has two forms; left and right, each is a mirror image of the other. RATKINSONJan 26, 2008
ladderlashing2.jpg
Ladderlashing Knot32 viewsSTART: The ladder lashing is started by using a clove hitch stopped with two half hitches to secure a rope to the top end of each rail.
STEP 1: Lay an overhand loop over each side rail so that the running end of each loop is to the outside.
STEP 2: Place a rung across the rails so that the standing part of each overhand loop is over the end of the rung and the running part of each overhand loop is under the rung.
STEP 3: Pull the running part side of each overhand loop behind and to the outside of each rail.
STEP 4: Then pull the loop over the end of the rung.
RATKINSONJan 26, 2008
manharnessknot.jpg
Man Harness Knot29 viewsRATKINSONJan 26, 2008
midshipmanshitch.jpg
Midshipman's Hitch488 viewsRATKINSONJan 26, 2008
monkeysfist.jpg
Monkey's Fist61 viewsRATKINSONJan 26, 2008
portuguesebowline.jpg
Portuguese Bowline121 viewsRATKINSONJan 26, 2008
prusikknot.jpg
Prusik Knot24 viewsRATKINSONJan 26, 2008
buntlinehitch.jpg
Buntline Hitch19 viewsRATKINSONJan 26, 2008
carrickbend.jpg
Carrick Bend19 viewsRATKINSONJan 26, 2008
cleathitch.jpg
Cleat Hitch23 viewsRATKINSONJan 26, 2008
107 files on 4 page(s) 3