Notice: Undefined offset: 8192 in /hermes/waloraweb094/b916/pow.stittsvillescouts/htdocs/photogallery/include/debugger.inc.php on line 112 Stittsville Scouts Photo Gallery - Knots
Go to Stittsville Scouts Homepage

Stittsville Scouts Photo Gallery

Welcome to the Stittsville Scouts Photo Gallery


Album List  FAQ  Register  Login

Last uploads  Last comments  Most viewed  Top rated  My Favorites  Search
 
Home > Scouting Resources > Knots

TITLE  +   - 
FILE NAME  +   - 
DATE  +   - 
POSITION  +   - 
seizingbend.jpg
Seizing Bend45 viewsRATKINSON
sheepshank.jpg
Sheepshank39 viewsUsed to temporarily shorten a rope, or isolate a weak portion of rope.RATKINSON
sheetbend.jpg
Sheetbend31 viewsUsed to join two ropes together, which may be of unequal thickness. RATKINSON
slippedsheetbend.jpg
Slipped Sheet Bend26 viewsRATKINSON
snugglehitch.jpg
Snuggle Hitch36 viewsRATKINSON
hangmansknot2.jpg
Hangman's Knot38 viewsThis knot needs no definition. It is made with eight or nine turns and not thirteen as is often superstitiously suggested. Apart from its obvious function, it is a useful knot for the end of a lanyard.RATKINSON
huntersbend.jpg
Hunter's Bend28 viewsRATKINSON
knifelanyardknot.jpg
Knife Lanyard Knot503 viewsRATKINSON
ladderlashing1.jpg
Ladderlashing Knot36 viewsLadder lashing allows for a quick and secure method for constructing a ladder or for constructing a decking with evenly space decking pieces. This form of lashing has several advantages over the traditional floor lashing. Less material is required because unlike floor lashing a space can be left between each piece of the decking. Also, each rung is securely lashed in place by several loops of rope in much the same way as a square lashing; with the traditional floor lashing only a single loop of the rope holds each end of the decking in place, therefore if one piece loosens, the entire deck loosens. The ladder lashing has two forms; left and right, each is a mirror image of the other. RATKINSON
ladderlashing2.jpg
Ladderlashing Knot34 viewsSTART: The ladder lashing is started by using a clove hitch stopped with two half hitches to secure a rope to the top end of each rail.
STEP 1: Lay an overhand loop over each side rail so that the running end of each loop is to the outside.
STEP 2: Place a rung across the rails so that the standing part of each overhand loop is over the end of the rung and the running part of each overhand loop is under the rung.
STEP 3: Pull the running part side of each overhand loop behind and to the outside of each rail.
STEP 4: Then pull the loop over the end of the rung.
RATKINSON
manharnessknot.jpg
Man Harness Knot31 viewsRATKINSON
midshipmanshitch.jpg
Midshipman's Hitch489 viewsRATKINSON
monkeysfist.jpg
Monkey's Fist62 viewsRATKINSON
portuguesebowline.jpg
Portuguese Bowline124 viewsRATKINSON
prusikknot.jpg
Prusik Knot25 viewsRATKINSON
buntlinehitch.jpg
Buntline Hitch20 viewsRATKINSON
carrickbend.jpg
Carrick Bend20 viewsRATKINSON
cleathitch.jpg
Cleat Hitch24 viewsRATKINSON
clovehitch.jpg
Clove Hitch22 viewsUsed to start a lashing, or otherwise loosely attach a rope to a pole.
RATKINSON
constrictorknot.jpg
Constrictor Knot21 viewsRATKINSON
doubledsheetbend.jpg
Double Sheet Bend20 viewsRATKINSON
figure8knot.jpg
Figure 8 Knot23 viewsRATKINSON
fishermansbend.jpg
Anchor Bend - or - Fisherman's Bend21 viewsRATKINSON
fishermansknot.jpg
Fisherman's Knot19 viewsRATKINSON
hangmansknot1.jpg
Hangman's Knot32 viewsThis knot needs no definition. It is made with eight or nine turns and not thirteen as is often superstitiously suggested. Apart from its obvious function, it is a useful knot for the end of a lanyard.RATKINSON
2halfhitches.jpg
2 Half Hitches21 viewsUsed to attach a rope to a pole or guy point. Must be securely tightened.
RATKINSON
3strandbraid.jpg
3 Strand Braid31 viewsRATKINSON
3triplebowline.jpg
3 Tripple Bowline24 viewsRATKINSON
alpinebutterfly.jpg
Alpine Butterfly33 viewsRATKINSON
anchorhitch.jpg
Anchor Hitch33 viewsRATKINSON
65 files on 3 page(s) 2